Optional Cut Watcher System:
HE&M Saw’s patented Cut Watcher system monitors the cut for squareness
to a pre-set deviation value. The system shuts down the saw when the
pre-set value is exceeded. The cut watcher uses a pair of carbide
bearing surfaces to provide two-point contact on the blade to detect
any change of blade angle, while the indicator lights on the control
console show the blade’s performance.
HEM
Inc., whose policy is that of continuous improvement, reserves the
right to change specifications, price or design at any time, without
notice and without incurring obligations.
HE&M INC. - PO Box 1148 - Pryor, OK
74362 - (P) 888.729.7787, (F) 918.825.4824,
info@hemsaw.com
