STANDARD FEATURES |
| 18"
(457mm)
x 22.25"
(565mm)
h
capacity @ 90 degrees |
18"
(457mm)
x 15.25"
(387mm)
h
capacity @ 45 degrees (L) |
| 18"
(457mm)
x 15.125"
(384mm)
h
capacity @ 45 degrees (R) |
| 18"
(457mm) x 10.25"
(260mm)
h
capacity @ 60 degrees (L) |
| 18"
(457mm) x 7.25"
(184mm)
h
capacity @ 60 degrees (R) |
| 1.25"
x 15'6" x .042" blade |
|
5 hp
motor |
Swing Away Control Console on Front of Saw
- w/ Touch Screen & All Function Control |
Powered Main & Feed Vise
- w/ Adjustable Clamping Pressure |
| Infinitely Variable
Blade Speed Drive (70-300 SFPM) - Controlled w/
Variable Frequency Controller |
| LED Blade Speed Readout |
| 0-24" Stroke Bar-Feed (4
Indexes) |
| Blade Chip Brush |
| Carbide
Blade Guides |
| Cut Watcher System |
| Blade Break Switch |
| Out of Stock Switch |
| Powered Blade Tension |
| Forward Cut Stop |
| Powered Guide Arm |
| Powered Arm Tilt |
|
Adjustable Cutting Pressure (o-300 PSI) |
| Adjustable Feed Rate
(0-3 inches/second) |
Base Rollers - One on
Each Side of Base
- Rollers are Idle & Non-Lifting |
| Built-In Coolant System |
| Boltable Side Wings |
|
220/440/3ph
motor - Air MAchine (85 PSI, 3-5 CFM) |
|
manufactured in pryor, ok - usa |
