STANDARD FEATURES |
18"
(457mm)
x 20.75"
(527mm)
h
capacity @ 90 degrees
(22.25"
(565mm)
w/o Cant) |
18"
(457mm)
x 14.25"
(361mm)
h
capacity @ 45 degrees (L)
(15.25" (387mm)
w/o Cant) |
18"
(457mm)
x 14"
(355mm)
h
capacity @ 45 degrees (R)
(15.125"
(384mm) w/o Cant) |
18"
(457mm) x 9.75"
(247mm)
h
capacity @ 60 degrees (L)
(10.25"
(260mm) w/o Cant) |
18"
(457mm) x 6.75"
(171mm)
h
capacity @ 60 degrees (R)
(7.25" (184mm) w/o
Cant) |
| 1.25"
x 15'6" x .042" blade |
3 Degree Arm Cant
- Arm Cant Can Be Removed by Adjusting Arm |
|
5 hp
motor |
| 2 HP Hydraulic System |
|
Swing Away Control Console on Front of Saw |
Full-Stroking Powered Main Vise
- w/ Adjustable Clamping Pressure |
Infinitely Variable
Blade Speed Drive (70-300 SFPM)
- Controlled w/
Variable Frequency Controller |
| LED Blade Speed Readout |
| Blade Chip Brush |
| Carbide
Blade Guides |
| Blade Break Switch |
| Powered Blade Tension |
| Forward Cut Stop |
|
Powered Guide Arm |
| Power Tilt |
|
Adjustable Cutting Pressure (o-300 PSI) |
| Adjustable Feed Rate
(0-3 inches/second) |
| Built-In Coolant System |
| Boltable Side Wings |
| |
| 220/440/3ph
motor - Hydraulic Machine |
