HOME PAGE    SAW SEARCH    EMPLOYMENT OPPORTUNITIES    CONTACT US
Wide Flange Series www.hemsaw.com
H-PIVOT            H-MITER            UTILITY SAW         VERTICAL         
DUAL COLUMN            WIDE FLANGE            PLATE            MATERIAL HANDLING
WF-SERIES:  WF130HA-DC-C

* Shown w/ Optional Top Clamps
 Request a Quote


* Click Picture to Enlarge
* Shown w/ Optional Top Clamp & Laser Light Switches
Why Buy a WF130?
WF130HA-DC-C Flyer
WF130HA-DC-C Footprint
WF130HA-DC-C Photos
Exclusive Features
Leasing Information
 STANDARD FEATURES
18" (457mm) x 27" (685mm) W  capacity
1-1/2" x 21' x .050" blade
9.2 degree permanent arm tilt
10 hp motor
2HP hydraulic system
Lock Out - Tag Out system
all function control - swing away Console
Solid State Programmable Logic controller
0-72" Stroke  Bar-Feed system w/ Multiple
   Indexes & w/ rollers All the way Through
Roller Base Machine
computer controlled feed system
material jog
powered blade tension
powered guide arm
full stroking  vises
Bi-Directional Vises
Chip Conveyor System
Cut Watcher System
blade chip brush
Out of Stock Switch
Blade Break Switch
24" roller discharge table
flat carbide blade guides
adjustable clamping pressure (0-2,500 lbs)
Electronic Controlled Traverse (Controls
  Cutting Rate & Cutting Force)
  Click Here for ECT Flyer
adjustable blade speed (60-360 sfm)
Inverter Blade Drive - LED Blade Speed
   Readout
Flood coolant System
Wash Down Hose
safety guards
220/440/3ph electrical requirement
   for motor
manufactured in pryor, ok - usa
OPTIONS
guide cap camlocks
top clamps - main/feed Set (full capacity)
top clamp -outboard vise (full capacity)
BI-DIRECTIONAL outboard powered vise
HYDRAULIC Computer Controlled Traverse
Shadow light system
Laser light system
cutting vibration dampening system
free standing console
swing away console on left side
Pedestal Mounted Control
Spray Mist Lubrication System
3rd holding vise on feed
 
TABLING
5'  idle Non Panned Roller Stock Table
10'  Idle Non Panned Roller Stock Table
10' Clutch Powered Non Panned Roller
   Stock Table
5'  Roller discharge table extension
10'  Roller discharge table extension
 
SUPPORT
1 year parts warranty
spare parts kit & in-depth manual
set-up by factory SERVICE TECHNICIAN
Free Telephone Technical Support

© 1999-2000 - HE&M INC. - PO Box 1148 - Pryor, OK 74362 - (P) 888.729.7787, (F) 918.825.4824, info@hemsaw.com

HEM Inc. reserves the right to change the design, price, and/or specifications at any time, without notice and without incurring any obligations.