HOME PAGE    SAW SEARCH    EMPLOYMENT OPPORTUNITIES    CONTACT US
Wide Flange Series www.hemsaw.com
H-PIVOT            H-MITER            UTILITY SAW         VERTICAL         
DUAL COLUMN            WIDE FLANGE            PLATE            MATERIAL HANDLING
WF-SERIES:  WF160LM-DC

* Shown w/ Optional Bi-Directional Outboard Powered Vise & Optional Full Capacity Top Clamp - Outboard Vise

Request a Quote


* Click Picture to Enlarge

 Wide Flange Literature
Exclusive Features
WF160 Video
WF160 Cut Demo
WF160LM-DC Photos
Leasing Information
 STANDARD FEATURES
25" x 30" (w) capacity
2" x 26'9" x .063" blade
15 hp motor
5HP hydraulic system
Lock Out - Tag Out System
9.2 degree permanent arm tilt
manual control -  swing away Console
powered blade tension
powered Moveable guide arm
guide cap camlocks
full stroking bi-directional main vise
Blade Break Switch
blade chip brush
 24" roller discharge table
flat carbide blade guides
roller base Machine
adjustable clamping pressure (0-2,500 lbs)
adjustable feed rate & cutting pressure
adjustable blade speed (70-500 sfm)
LED Blade Speed Readout on Console
VARIABLE FREQUENCY CONTROLLER for Blade Speed
flood coolant system
Wash Down Hose
 blade guards for safety
Please Specify 220V-3ph or  440V-3ph Electrics   This is NOT a Dual Voltage System
 
manufactured in pryor, ok - usa
OPTIONS
chip Conveyor system
full capacity top clamp - main vise
full capacity top clamp -outboard vise
bi-directional outboard powered vise 
hydraulic Computer Controlled Traverse
cut watcher system
cutting vibration dampening system
Shadow light system
Laser light system
2-5/8" Blade Option
Spray Mist Lubrication - Manual Switching
Spray Mist Lubrication - Flood/Mist Selector Switch
Swing away console on left side
free standing console
Pedestal Control Console
 
TABLING
10'  idle roller load table
10'  Powered roller Load Table
5' Roller Discharge Table Extension
10' Roller Discharge Table Extension
10' Powered Roller Discharge Table Extension
5' x 34" Non Panned Roller Stock Table
10' x 34" Non Panned Roller stock Table
10' x 34" Powered Non Panned Roller Stock
SUPPORT
1 year parts warranty
spare parts kit & in-depth manual
set-up by factory SERVICE TECHNICIAN

HE&M INC. - PO Box 1148 - Pryor, OK 74362 - (P) 888.729.7787, (F) 918.825.4824, info@hemsaw.com

Copyright 1999, HE&M Inc. - Site Built By: machineryonline.com Site Building Services