|
|
Eliminator I Fluids •
Eliminator II Fluids
•
Fluid Accessories |
|
The Purpose of Coolant:
•Removal of heat from the cutting
tool and work piece
•Quality improvement of the work piece by continual
removal of
chips from the tool and cutting zone |
Synthetic:
Synthetics are made up of water and water
soluble additives. They derive their lubricity from surfactants
or soap type additives. Synthetics off a cleaner environment and
little residue left on the work piece. |
Semi-Synthetic:
Semi-Synthetics contain a low to moderate
portion of oil (2-30%) as well as water soluble additives.
Semi-Synthetics give the best of both worlds with the cleanliness of
the synthetics, and the corrosion protection and added lubricity of
petroleum oil. |
Soluble Oil:
Soluble Oils contain 60-90% petroleum, or
mineral oil along with emulsifiers and other water soluble additives.
Soluble Oils offer improved cooling and lubrication due to the
blending of oil and water. They will also leave a protective
film on machine parts, tool, and work piece. |
|
Eliminator Fluid Stocking Distributors List
We are currently looking for stocking distributors.
For more
information, please contact Beth Tindle at:
Email:
coolant@hemsaw.com
•
Phone: (918)
825-4821 x6252 |
|
|
Quote on
Fluids
•
Maintenance
•
Eliminator I
•
Eliminator II
• Accessories
|
|
HEM
Inc., whose policy is that of continuous improvement, reserves the
right to change specifications,
price or design at any time, without
notice and without incurring obligations.
|
