RECONDITIONED SAWS

HE&M Saw can recondition any HE&M Saw.  Reconditioning can be done as a trade-in on a new saw or a saw can be sent in, reconditioned, and returned to the customer.

The saws are tagged as reconditioned by the addition of "R"  and the date to the serial number for tracking purposes.

Reconditioning consists of the following:

 1.  The Entire Saw is Steam Cleaned.
 2.  Cylinders are completely rebuilt.
 3.  Tension Springs on the Blade Tensioner are  
        replaced.
 4.  Gear Box
      - Gear Box is drained.
      - Seals on Transmission are replaced.
      - If there is wear in the gear box, the gear box is
          rebuilt.
      - New Gear Oil is added.
 5.  All Alignments are recalibrated.
 6.  All Guides are replaced.
 7.  All Belts are replaced.
 8.  Repair/Replace Parts as Needed.
      - ANY worn parts are rebuilt or replaced.
      - For Example, the saw is checked from top to
          bottom to insure that all parts are working
          correctly.  If a part needs replacing, it is replaced
          or rebuilt.
 9.  Safety Technology is updated.
10.  The saw is painted with a New, Fresh Coat of Paint.
11.  All New Decals & Caution Labels are put on the
         saw.
When reconditioning is complete, the band saw meets
         all new saw specifications and is given a warranty.