|
| A. |
Our
pivot saws feature a very wide pivot point for
maximum stability of the head through the cutting
zone. A pressed bronze bushing in the rotating
area increases the life of the pivot, for decades of
trouble free operation. |
| B. |
The
pivot is also elevated above the cutting area, so the
saw goes through less of an angular change through the
cut. This evens out the weight of the head
giving a more uniform weight change when attacking the
metal. |
| C. |
We put the blade on the opposite side of the head so the
blade is always close to the vise when cutting angles.
A spring compensation system helps to keep the center of
gravity even as the head is raised. When cutting the
center of gravity remains equal throughout the cut. |
| D. |
Flat
carbide guides provide solid support to each side of the
blade, increasing the stability of the blade through the
material Guides are ground and relieved towards
the twist of the blade to make the transition into the perpendicular
position easy on the blade. |
| E. |
The
heavy duty feed systems for automatic bar feed saws
feature a patented "Triple Link" floating vise
system to keep crooked material from binding. This
ensures an accurate feed length that holds the tightest
of tolerances for years and years. |
| F. |
Vises
are engineered for versatility & ease of operation,
and come standard with infinitely variable
clamping pressure to approximately 800 lbs. Simply
load your material, get the vise close and clamp. |
| G. |
The
simplicity of the control keeps the sawing process easy
for operators, wile giving flexibility in attacking
different metals with adjustable cutting pressures and
feed rates. |
|
