Conveyors

Stage II Conveyors:

 

Roller Size:   4” diameter x .312” wall DOM tubing on 12” or 24” Roller Centers (Roller Width is either 29”, 40”, or 46” depending on Saw Model)
Section Sizes:   5’ or 10’
Offered as either an idle conveyor or a powered conveyor

These conveyors can be used with H130H, Hurricane, H130-DC, DC20, CT2000, H160-DC through H3236, all Wide Flange, and all Vertical Series.

These conveyors can be used with cross transfers.

Description:
•    Conveyor load capacity is 1,100 lbs. per foot.
•    For each roller, class 5 precision, hardened and ground sealed bearings are used for long-term trouble free use.  On the powered conveyor, we use one continuous #60 chain for each section of conveyor.  The roller shafts are mounted in pillow blocks for precision roller-to-roller alignment.
•    The frames are made with 6” x 2” x 3/16” wall rectangular structural tubing giving more strength than the customary channel iron frames.
•    The legs are fabricated with foot bars that sit on leveling pads with approximately 1-1/2” of vertical adjustment.  The leveling pads can be anchored to the floor.
•    Powered conveyors are controlled by a free-standing pedestal console with a joystick that controls the conveyors in and out.
•    Powered conveyors have 5 HP motors controlled by a Variable Frequency Drive and a gear reducer that drives the rollers.  The speed is variable to 50 FPM max forward and reverse.
•    If powered, the automatic saws have conveyors with in-feed rollers that clutched or controlled with a “roller-assist” mode for the indexing of larger loads. The out-feed rollers are clutched.
•    Pricing includes all fittings, couplings, and wiring for the installation.
•    HE&M Saw ships conveyors in complete sections, NOT “Erector Set” style, reducing typical installation costs by 2/3rd.

Stage III Conveyors:

 

Roller Size:   6” diameter x .312” wall DOM tubing on 12”, 26″ or 36” Roller Centers (Roller Width is either 29”, 40”, or 46” depending on Saw Model)
Section Sizes:   5’ or 10’
Offered as either an idle conveyor or a powered conveyor

These conveyors can be used with H130H, Hurricane, H130-DC, DC20, CT2000, H160-DC through H3236, all Wide Flange, and all Vertical Series.

These conveyors can be used with cross transfers.

Description:
•    DOM tubing is produced with close diameter tolerances that allow for better roller-to-roller alignment and load dispersing.
•    Precision hardened and ground sealed bearings are used for long-term trouble free use..
•    Each roller has a 5,000 lbs capacity.
•    We use one continuous chain for each section of conveyor.
•    Powered conveyors are controlled by a free-standing pedestal console with a joystick that controls the conveyors in and out.
•    The sections of conveyor are linked with a chain driven connector.
•    The roller shafts are mounted in pillow blocks to allow for precision roller to roller alignment.
•    This style of mounting makes easy replacement of rollers, bearings, and shafts when needed.
•    Pricing includes all fittings, couplings, and wiring for the installation.
•    HE&M Saw ships conveyors in complete sections, NOT “Erector Set” style, reducing typical installation costs by 2/3rd.

Stage IV (Mill Duty) Conveyors:

Roller Size:   6” diameter x .312” wall DOM tubing on 8”, 16” or 36” Roller Centers (Roller Width is either 29”, 40”, or 46” depending on Saw Model)
Section Sizes:   4’ or 9’
Offered as either an idle conveyor or a powered conveyor

These conveyors can be used with H130-DC, CT2000, H160-DC through H3236, all Wide Flange, V140, VT140, V200, and VT200 Series.

These conveyors can be used with cross transfers.

Description:
•    Conveyor load capacity is 5000 lbs. each roller.
•    For each roller, class 5 precision, hardened and ground sealed bearings are used for long-term trouble free use.  On the powered conveyor, we use one continuous #60 chain for each section of conveyor.  The roller shafts are mounted in pillow blocks for precision roller-to-roller alignment.
•    The frames are made with C12 x 30# and C6 x 10.5# structural channel frame rails.
•    The legs are fabricated with W8 x 21# wide flange with foot bars that sit on leveling pads with approximately 1-1/2” of vertical adjustment.  The leveling pads can be anchored to the floor.
•    Powered conveyors are controlled by a free-standing pedestal console with a joystick that controls the conveyors in and out.
•    Powered conveyors have 5 HP motors controlled by a Variable Frequency Drive and a gear reducer that drives the rollers.  The speed is variable to 50 FPM max forward and reverse.
•    If powered, the automatic saws have conveyors with in-feed rollers that are clutched or controlled with a “roller-assist” mode for the indexing of larger loads. The out-feed rollers are clutched.
•    Pricing includes all fittings, couplings, and wiring for the installation.
•    HE&M Saw ships conveyors in complete sections, NOT “Erector Set” style, reducing typical installation costs by 2/3rd.

 For more information please contact J R Rupprecht : Phone: 918-824-6269  Email: JR@hemsaw.com