Special Applications

We engineer to application specific requirements.  Below are many examples of what we can do.



Noncontact Material Length Positioner

Description: A servo-driven measuring device that utilizes the latest sensor and motion control technology for accurate and time saving material measuring.

Noncontact Material Length Positioner Video



Contact Material Length Positioner

Description: A measuring device engineered for bundle cutting and heavy material applications for lengths up to 65 feet.



Standard-Duty Material Stop

Description: A material stop designed for lighter duty material applications and single piece cutting.



Pop-Up Alignment Roller

Description:  These rollers are used when the conveyor loading mechanism must be on the datum side.



High Density Urethane “V” Roller

Description:  These are designed for conveying and cutting rounds, such as tubing, pipe, and solids.  They are a good choice when the horizontal datum (pass line height) is not critical, as the horizontal datum changes height with each diameter.



Contour Alignment Roller

Description:  These are designed for conveying and cutting rounds, such as tubing, pipe, and solids.  They are the right choice when the horizontal datum (pass line height) must remain constant.  The material will always find it’s way to the bottom (center) of the contoured roller.

Contour Roller Video



Video Monitoring Systems

Description:  Video monitoring systems are available to allow for visual  positioning  of material from remote locations.



Ejector Bar (Off-Loader)

Description:  An ejector bar is used for discharging material to stationary holding arms.



Static Holding Arms

Description:  Standard & heavy-duty Static Holding Arms are used to hold different weight duty cycles on the discharge side.



Static Loading Arms

Description:  Static Loading Arms are used to hold different weight duty cycles on the loading side.



Sliding Roller Track Section

Description:  A sliding roller section is used with horizontal miter saws when the angle being cut allows the conveyor to interfere with the travel of the arm, i.e. 60 degrees.  The section can be rolled back enough to clear the arm, yet support the material being cut.

Sliding Roller Track Section Video


Bundle Clamps Rebar Cutting System

Description:  These clamps are used for clamping “round” bundles.  They work well when indexing lengths that do not have close tolerances.  Typically the tolerance should be +/- 0.025” or greater on indexed lengths of 24” or less.

These clamps are not removable and are used when the product is consistently round bundles.

The pictured application is on a vertical saw; but these clamps can be adapted to a horizontal saw.


Hex Bundle Clamps

Description:  Designed to tightly clamp hex shaped bundles on all sides.

These clamps are adjustable for bundles that are approx. 15″ to 21″.

The clamp fixture is bolted to the vise jaws and can be removed for standard vise use.



Custom Engineered Applications

Description:  By design, our company has flexibility to take standard models and convert them into custom equipment.


Cold Weather Package

Description:  Maintains the saw’s proper hydraulic fluid temperature in cold weather climates.


 

handling_quote

For more information please contact

Neva Blakemore

Phone: 918-824-6256

Email: nblakemore@hemsaw.com