Request a Quote search



Vertical Band Saws

Product Description

The VT100LM-60 will miter up to 60ᵒ in both directions. A self-contained hydraulic system powers the full stroking vise, arm tilt, and guide arm. Functions are operated from a touch screen control and the saw can be operated in manual or semi-automatic modes. Various options are available.

Technical Highlights

  • Main Capacity: 0-18" W x 0-20.75" H
  • Bar-feed: N/A
  • Blade: 15' 6" L x 1.25" H x .042"
  • Motor: 5 HP
  • Hydraulic Motor: 1 HP
  • Operation: Semi-Automatic

Machine Information

Questions? Call Us Print Specs
  • Technical Specifications
  • Standard Features
  • Optional Features
  • Support & Documentation
  Vertical Band Saws: VT100LM-60
Rectangular Capacity 0-18" W x 0-20.75" H
Square Capacity 0-18" (Square)
Round Capacity 0-18" (Diameter)
Bar-feed N/A
Motor 5 HP
Hydraulic Motor 1 HP
Operation Type Semi-Automatic
Power Source Air
Weight N/A
Blade Type Bandsaw
Blade Size 15' 6" L x 1.25" H x .042"
Cantilever Removable
Bandsaw Blade Speed N/A
Bundle Cut? Yes
Vertical Band Saws: VT100LM-60
  • Control Console w/ 7" Touch Screen
  • 4° Removable Arm Cant
  • Powered Tilt w/ Angle Readout on Touch Screen
  • Vise - Full Stroking Main
  • Adjustable Clamping Force
  • Carbide Blade Guides
  • Guide Arm - Powered
  • Variable Blade Speed w/ Readout on Touch Screen
  • Air Powered Blade Tension
  • Adjustable Feed Rate
  • Adjustable Cutting Pressure
  • Forward Cut Stop
  • Coolant System - Flood w/ Wash-Down Hose
  • Boltable Side Wings for Coolant Drainage
  • Blade Brush
  • Broken Blade Function
  • Blade Change Interlock
  • Safety Guards
  • 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
  • 85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)
Vertical Band Saws: VT100LM-60
  • Vise - 2nd Main
  • Swing-Away Top Clamp - Main Vise
  • Power Programmable Tilt from Touch Screen
  • Passive "Cut Watcher®" System
  • Laser Light System
  • 12" H Wear Plates - Non Mitered
  • Right to Left Feed Direction
  • Spray Mist Lubrication
  • Pedestal Mounted Control Console
  • 5' Roller Load Table
  • 10' Idle Roller Load Table
  • 5' Roller Discharge Table
  • 10' Roller Discharge Table
  • 5' Idle Roller Stock Table
  • 10' Idle Roller Stock Table
  Document Name
description VT100LM-60 Footprint View
description V100LM-60 & VT100LM-60 Program Tilt (Older style) View
description Vertical Air Saw Routine Maintenance View
description Vertical Saw Blade Change View
description Blade Guide Carbides and Installation View
description HE&M Saw Practical Cutting Guide View
description Vertical Air Saw Installation View
description V100LM-60 & VT100LM-60 Wash Down Hose View
description Vertical Saws Coolant System Setup View
description Gear Reducers View
description Vertical Saw Removing Shipping Brackets View
description Installing the Expansion Chamber View
description Vertical Saw Arm Alignment View
description Vertical Saw Side Wing Installation View
description Vertical Air Saw Saw Vise View
description Vertical Blade Tracking and Overhang View
description Diagnostic Switch for Air Vertical and A-1 View
description Vertical Saws Leveling the Saw View
description Vertical Air Saw Swing-Away Top Clamp View
description Vertical Air Saw Unpacking Saw View
description Saw Cutting Out-of Square View
description Air Bleeder Valve View
description Blade Brush Adjustment View
description Vertical Air Saw Oil Tank Reservoir Refill View
description Programming the Cub 5 Red Lion for Blade Speed View
description V100LM-60 VT100LM-60 Jewell Retrofit View

Request A Quote

Interested in pricing? Get in touch with a sales representative by submitting the Quote Request form.

Search HE& Show Mobile Navigation