phone 1 (888) 729-7787
Request a Quote search

V140HM-60-CTS

V140HM-60-CTS

Vertical Band Saws

Product Description

The V140 and VT140HM-60-CTS band saws vary from a vertical blade orientation on the V140 to a forward-canting blade on the VT140 version. The touch screen control, mounted in a swing-away console, allows the operator to enter an angle and the arm will travel to that position and stop.

Technical Highlights

  • Main Capacity: 0-24" W x 0-31" H
  • Bar-feed: N/A
  • Blade: 20' 0" L x 1.5" H x .050"
  • Motor: 10 HP
  • Hydraulic Motor: 5 HP
  • Operation: Semi-Automatic
Request a Quote Shop Replacement Parts
Shop Blades Shop Fluids

Machine Information

Questions? Call Us Print Specs
  • Technical Specifications
  • Standard Features
  • Optional Features
  • Support & Documentation
  Vertical Band Saws: V140HM-60-CTS
Rectangular Capacity 0-24" W x 0-31" H
Square Capacity 0-24" (Square)
Round Capacity 0-24" (Diameter)
Bar-feed N/A
Motor 10 HP
Hydraulic Motor 5 HP
Operation Type Semi-Automatic
Power Source Hydraulic
Weight N/A
Blade Type Bandsaw
Blade Size 20' 0" L x 1.5" H x .050"
Cantilever Fixed
Bandsaw Blade Speed N/A
Bundle Cut? Yes
Vertical Band Saws: V140HM-60-CTS
  • Swing-Away Control Console w/ 7" Touch Screen
  • Powered Programmable Tilt w/ Angle Readout
  • Vise - Full Stroking Main
  • Adjustable Clamping Force
  • Carbide Blade Guides
  • Guide Arm - Powered
  • Variable Blade Speed w/ Readout on Touch Screen
  • Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
  • Idle Base Rollers - 1 Each Side of Base
  • Powered Blade Tension
  • Forward Cut Stop
  • Coolant System - Flood w/ Wash-Down Hose
  • Blade Brush
  • Broken Blade Function
  • Blade Change Interlock
  • Safety Guards
  • 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
Vertical Band Saws: V140HM-60-CTS
  • Swing-Away Top Clamp - Main Vise
  • Top Clamp - Reduced Capacity Main Vise
  • Vise - 2nd Main
  • Passive "Cut Watcher®" System
  • Laser Light System
  • Power Raised Lift Up Rollers
  • Chip/Swarf Removal System - Chip Conveyor
  • Chip/Swarf Removal System - Manual Hand-Crank Chip Conveyor
  • Spray Mist Lubrication
  • Pedestal Mounted Control Console
  • 5' Roller Load Table
  • 10' Idle Roller Load Table
  • 10' Powered Roller Load Table
  • 5' Roller Discharge Table
  • 10' Roller Discharge Table
  • 10' Powered Roller Discharge Table
  • 5' Idle Roller Stock Table
  • 10' Idle Roller Stock Table
  • 10' Powered Roller Stock Table
  Document Name
description V140HM-60-CTS Footprint View
description Vertical Hydraulic Saws Control Panel View
description Vertical Hydraulic Manual Saws Omron Control TS & CTS Operations View
description Vertical Hydraulic Saws Routine Maintenance View
description Vertical Hydraulic Saws Changing the Blade View
description Blade Guide Carbides and Installation View
description Vertical Hydrualic Saw Lubrication Points View
description HE&M Saw Practical Cutting Guide View
description Gear Reducers View
description Saw Cutting Out-of Square View
description Blade Brush Adjustment View
description Vertical Hydraulic Saws Cut Watcher View
description Connecting Error on Omron Touch Screens View
description H9 or H4 Error on Omron CJ1W-CRM21 Module View
description Vertical Hydraulic Saw Installation View
description Vertical Lock-Out Tag-Out Procedure View
description Diagnose Band Motor VFD Error Rev1.0 View
description Vertical Door Safety Switches View
description Vertical TS Control Clearing the Panic Button View
description Vertical Saws Leveling the Saw View
description Vertical Saws Coolant System Setup View
description Two Hand Control System Retrofit Package View
description Cold Weather Package View
description Spray Mist Lubrication Hydraulic Saws View
description Frequently Asked Vertical Touch Screen Questions View
description Physical Pivot Adjustment Procedure View
description Hydraulic Vertical Saws PLC to Memory Cassette Instructions View
description Vertical Hydraulic Saws Cut Watcher View
description Vertical Hydraulic Saws Installation of the Intensifier View
description Vertical Hydraulic Saws Mounting Steps View
description Vertical Saw CCFT Pumpkin Patch Board Replacement (Older Models) View
description Vertical Hydraulic Saw Unpacking Saw View
description Vertical Saw Removing Shipping Brackets View
description M12 CABLE View
description Replacing Main Program Chip View
description Installing the Expansion Chamber View
description Vertical Blade Tracking and Overhang View
description Vertical Saw Arm Alignment View
description Vertical Saw Calibrating the Tilt Angle Pumpkin Patch Control (Older Models) View

Request A Quote

Interested in pricing? Get in touch with a sales representative by submitting the Quote Request form.

Request A Quote
Search HE&MSaw.com Show Mobile Navigation