Request a Quote search

VT120HM-60-CTS

VT120HM-60-CTS

Vertical Band Saws

Product Description

The VT120HM-60-CTS miters up to 60áµ’ in both directions. The control console is located in a swing-away console at the front of the saw. A touch screen is used to operate the various functions on the saw. Optional vises and other features are available.

Technical Highlights

  • Main Capacity: 0-18" W x 0-24" H
  • Bar-feed: N/A
  • Blade: 16' 6" L x 1.25" H x .042"
  • Motor: 7.5 HP
  • Hydraulic Motor: 5 HP
  • Operation: Semi-Automatic

Machine Information

Questions? Call Us Print Specs
  • Technical Specifications
  • Standard Features
  • Optional Features
  • Support & Documentation
  Vertical Band Saws: VT120HM-60-CTS
Rectangular Capacity 0-18" W x 0-24" H
Square Capacity 0-18" (Square)
Round Capacity 0-18" (Diameter)
Bar-feed N/A
Motor 7.5 HP
Hydraulic Motor 5 HP
Operation Type Semi-Automatic
Power Source Hydraulic
Weight N/A
Blade Type Bandsaw
Blade Size 16' 6" L x 1.25" H x .042"
Cantilever Fixed
Bandsaw Blade Speed N/A
Bundle Cut? Yes
Vertical Band Saws: VT120HM-60-CTS
  • Swing-Away Control Console w/ 7" Touch Screen
  • Powered Programmable Tilt w/ Angle Readout
  • Vise - Full Stroking Main
  • Adjustable Clamping Force
  • Variable Blade Speed w/ Readout on Touch Screen
  • Carbide Blade Guides
  • Guide Arm - Powered
  • Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
  • Powered Blade Tension
  • Idle Base Rollers - 1 Each Side of Base
  • Forward Cut Stop
  • Coolant System - Flood w/ Wash-Down Hose
  • Blade Brush
  • Broken Blade Function
  • Safety Guards
  • 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
Vertical Band Saws: VT120HM-60-CTS
  • Vise - 2nd Main
  • Swing-Away Top Clamp - Main Vise
  • Top Clamp - Reduced Capacity Main Vise
  • Material List w/ Larger 8" Touch Screen
  • Passive "Cut Watcher®" System
  • Laser Light System
  • Chip/Swarf Removal System - Manual Hand-Crank Chip Conveyor
  • Power Raised Lift Up Rollers
  • Powered Chip Conveyor
  • Spray Mist Lubrication
  • Pedestal Mounted Control Console
  • Cold Weather Package
  • Hydraulic Tank Heater
  • 5' Roller Load Table
  • 10' Powered Roller Load Table
  • 5' Roller Discharge Table
  • 10' Roller Discharge Table
  • 10' Powered Roller Discharge Table
  • 5' Idle Roller Stock Table
  • 10' Idle Roller Stock Table
  Document Name
description VT120HM-60-CTS Footprint View
description Vertical Hydraulic Manual Saws Omron Control TS & CTS Operations View
description Vertical Hydraulic Saws Routine Maintenance View
description Vertical Hydraulic Saws Changing the Blade View
description Vertical Lock-Out Tag-Out Procedure View
description Blade Guide Carbides and Installation View
description Vertical Hydrualic Saw Lubrication Points View
description HE&M Saw Practical Cutting Guide View
description Vertical Hydraulic Saw Installation View
description Gear Reducers View
description Saw Cutting Out-of Square View
description Blade Brush Adjustment View
description Vertical Hydraulic Saws Cut Watcher View
description Connecting Error on Omron Touch Screens View
description H9 or H4 Error on Omron CJ1W-CRM21 Module View
description Diagnose Band Motor VFD Error Rev1.0 View
description Vertical Door Safety Switches View
description Vertical TS Control Clearing the Panic Button View
description Vertical Saws Leveling the Saw View
description Vertical Saws Coolant System Setup View
description Two Hand Control System Retrofit Package View
description Cold Weather Package View
description Spray Mist Lubrication Hydraulic Saws View
description Frequently Asked Vertical Touch Screen Questions View
description Physical Pivot Adjustment Procedure View
description Vertical Hydraulic Saws Control Panel View
description Hydraulic Vertical Saws PLC to Memory Cassette Instructions View
description Vertical Hydraulic Saws Cut Watcher View
description Vertical Hydraulic Saws Installation of the Intensifier View
description Vertical Saw Calibrating the Tilt Angle Pumpkin Patch Control (Older Models) View
description Vertical Hydraulic Saws Mounting Steps View
description Vertical Saw CCFT Pumpkin Patch Board Replacement (Older Models) View
description Vertical Hydraulic Saw Unpacking Saw View
description Vertical Saw Removing Shipping Brackets View
description M12 CABLE View
description Replacing Main Program Chip View
description Installing the Expansion Chamber View
description Vertical Blade Tracking and Overhang View
description Vertical Saw Arm Alignment View

Request A Quote

Interested in pricing? Get in touch with a sales representative by submitting the Quote Request form.

Search HE&MSaw.com Show Mobile Navigation