Request a Quote search

DC22A

DC22A

Dual Column Band Saws

Product Description

The DC22A band saw operates using a touch screen control mounted in a swing-away console. A 48” servo twin ball-screw bar-feed is standard and a 120” version is optional. A full-stroking main vise positions automatically with the powered guide arm. The Cut Watcher® System and chip auger are standard.

Technical Highlights

  • Main Capacity: 0-22" W x 0-22" H
  • Bar-feed: 0-48" (Stroke Servo Twin Ball-Screw - Multiple Index)
  • Blade: 21' 0" L x 2" H x .063"
  • Motor: 10 HP
  • Hydraulic Motor: 10 HP
  • Operation: Automatic

Machine Information

Questions? Call Us Print Specs
  • Technical Specifications
  • Standard Features
  • Optional Features
  • Support & Documentation
  Dual Column Band Saws: DC22A
Rectangular Capacity 0-22" W x 0-22" H
Square Capacity 0-22" (Square)
Round Capacity 0-22" (Diameter)
Bar-feed 0-48" (Stroke Servo Twin Ball-Screw - Multiple Index)
Motor 10 HP
Hydraulic Motor 10 HP
Operation Type Automatic
Power Source Hydraulic
Weight N/A
Blade Type Bandsaw
Blade Size 21' 0" L x 2" H x .063"
Cantilever
Bandsaw Blade Speed N/A
Bundle Cut? No
Dual Column Band Saws: DC22A
  • Smart Saw® Control Console w/ 9" Touch Screen
  • Industrial IOT Ready - MTConnect Output
  • 24" Solid Discharge Table
  • Full-Stroking Split Main Vise
  • Adjustable Clamping Force
  • Carbide Blade Guides
  • Lead In/Lead Out Roller Guides
  • Guide Arm Moves in Conjunction w/ Main Vise
  • Variable Blade Speed w/ Readout on Touch Screen
  • Passive "Cut Watcher®" System
  • Adjustable Feed Rate
  • Adjustable Cutting Pressure
  • Powered Blade Tension
  • Chip/Swarf Removal System - Chip Auger
  • Blade Brush
  • Coolant System - Flood w/ Wash-Down Hose
  • Two-Hand Operation Controls
  • Broken Blade Function
  • Out-of-Stock Function
  • Automatic Blade Idle
  • Blade Change Interlock
  • Safety Guards
  • 220V/3PH or 440V/3PH Electrical Motor Requirement - This is Not a Dual Voltage Machine
Dual Column Band Saws: DC22A
  • 0-120" Stroke Servo Twin Ball-Screw Bar-Feed w/ 3rd Vise
  • Heavy-Duty Servo Feed
  • Bar-Feed Filler Plates
  • Top Clamp - Full Capacity Main Vise (Increases Remnant Length by 2")
  • Top Clamp - Full Capacity Feed Vise (Increases Remnant Length by 3")
  • Top Clamp - Full Capacity Outboard Vise
  • Vise - 3rd on Feed
  • Vise - Outboard Powered on Discharge
  • Roller Discharge Table (in Lieu of Solid)
  • Servo Controlled Traverse (SCT) - Includes Active "Cut Watcher®"
  • Remote Diagnostics
  • Laser Light System
  • Pedestal Mounted Control Console
  • Roll-Around Control Console
  • Cold Weather Package
  • Hydraulic Tank Heater
  • 5' Idle Roller Stock Table
  • 10' Idle Roller Stock Table
  • 10' Powered Roller Stock Table
  Document Name
slideshow DC22 Band Saw Blade Installation View
slideshow Carbide Blade Cleaning View
description DC22A Footprint Standard 48 Servo Bar-Feed View
description DC22A Footprint Optional 120 Servo Bar-Feed View
description Connecting Error on Omron Touch Screens View
description Blade Guide Carbides and Installation View
description Servo Bar-Feed Lubrication Points View
description HE&M Saw Practical Cutting Guide View
description Gear Reducers View
description Saw Cutting Out-of Square View
description Blade Brush Adjustment View
description Blade Tracking and Overhang View
description H9 or H4 Error on Omron CJ1W-CRM21 Module View
description Hydraulic Motor Bar-Feed Lubrication Points View
description Diagnose Band Motor VFD Error Rev1.0 View
description In-Feed Roller Guide Adjustment View
description HCCT Controls Gray Keypad (Older Models) View
description HCCT Set-Up Omron TS Control (Older TS & CTS Models) View
description Setup Procedure Omron Servo Feed System View
description HCCT Retrofit Instructions (Older Models) View
description Troubleshooting Omron Feed Servo System View
description Installing an Omron Servo System for Feed Shuttle View
description Two Hand Control System Retrofit Package View
description Cold Weather Package View
description Spray Mist Lubrication Hydraulic Saws View
description Hydraulic Automatic Machines Operation Status Indicator View
description Installing Feed Shuttle Safety Bumper View
description M12 CABLE View
description Replacing Main Program Chip View
description Ballscrew Top Clamp Pusher Bar Alignment Procedure View

Request A Quote

Interested in pricing? Get in touch with a sales representative by submitting the Quote Request form.

Search HE&MSaw.com Show Mobile Navigation