Band Saws

VT100LM-60

VT100LM-60


  • HE&M VT100LM-60 *Shown w/ Optional 2nd Vise & Laser Light

  • HE&M VT100LM-60 *Shown w/ Optional 2nd Vise & Laser Light

  • HE&M VT100LM-60 *Shown w/ Optional 2nd Vise & Laser Light

  • HE&M VT100LM-60 *Shown w/ Optional 2nd Vise & Laser Light

  • HE&M VT100LM-60 *Shown w/ Optional 2nd Vise & Laser Light

  • Blade Tension Switch

  • Control Console w/ Touch Screen

  • Control Console w/ Touch Screen

  • Control Console w/ Touch Screen

  • Control Console w/ Touch Screen

  • Control Console w/ Touch Screen

  • Control Console w/ Touch Screen

  • Control Console w/ Touch Screen

  • Built-In coolant System

  • Built-In coolant System

  • Built-In coolant System

  • Built-In coolant System

  • Cut Area

  • Cut Area

  • Adjustable Feed Rate

  • Forward Cut Motion

  • Forward Cut Motion

  • Gearbox & Motor

  • Powered Adjustable Guide Arm

  • Powered Adjustable Guide Arm

  • Main Vise

  • Main Vise

  • Main & Optional 2nd Main Vise

  • Carbide Blade Guides

  • Carbide Blade Guides

  • Optional Laser Light

  • Optional Laser Light

  • Optional 2nd Main Vise

  • Optional 2nd Main Vise

* Height Capacity Increases by 1.5″ w/ Blade Cant Removed
* Shown w/ Optional 2nd Main Vise & Laser Light

FootprintFlyerVideo

D-015010-010 IND TUBE - Sheet1

SUPPORT

1 Year Parts Warranty
Spare Parts Kit & In-Depth Manual
Free Telephone Technical Support

Vertical: VT100LM-60

Capacity: 18″ W x 20.75″ H
Miter: 18″ W x 14.25″ left @ 45°
Miter: 18″ W x 14″ right @ 45°
Miter: 18″ W x 9.75″ left @ 60°
Miter: 18″ W x 6.75″ right @ 60°
Blade: 15’6″ x 1.25″ x .042″
Cant: 4° Removable
Motor: 5 HP
Operation: Semi Automatic

STANDARD FEATURES

Adjustable Clamping Force
Adjustable Cutting Force
Adjustable Feed Rate
Air Powered Blade Tension
Blade Brush
Boltable Side Wings for Coolant Drainage
Broken Blade Indicator
Carbide Blade Guides
Flood Coolant System w/ Wash-Down Hose
Forward Cut Stop
Full Stroking Main Vise
Safety Lockout Key
Powered Guide Arm
Powered Tilt w/ Angle Readout
Safety Guards
Console Located on Front of Saw w/ 7″ Touch Screen
Powered Tilt w/ Angle Readout on Touch Screen
Variable Blade Speed w/ Readout on Touch Screen

220V/440V/3PH Electrical Motor Requirement
85 PSI, 4-6 CFM Minimum Air Requirement (Equipped w/ Air Filter/Lubricator)

OPTIONAL FEATURES

10′ Idle Roller Stock Table
10′ Roller Discharge Table
10′ Roller Load Table
2nd Main Vise
5′ Idle Roller Stock Table
5′ Roller Discharge Table
5′ Roller Load Table
Cut Watcher® System (Reduces Vert. Capacity by 1″)
Laser Light System
Pedestal Mounted Control Console
Spray Mist Lubrication
Swing-Away Top Clamp – Main Vise
12″ H Wear Plates – Non Mitered
Power Programmable Tilt from Touch Screen
Idle Rollers (Per Side)