Band Saws

VT100HLM-60-CTS

VT100HLM-60-CTS


  • HEM VT100HLM-60 Vertical Band Saw

  • Swing-Away Console w/ Touch Screen Controls

  • Swing-Away Console w/ Touch Screen Controls

  • Swing-Away Console w/ Touch Screen Controls

  • Touch Screen – Main Cut Screen

  • Touch Screen – Control Panel Screen

  • Touch Screen – Accessory Options Screen

  • Heavy-Duty Band Wheels & Blade Chip Brush

  • Carbide Blade Guides

  • Powered Blade Tension

  • Built-In Coolant System with Wash-Down Hose

  • Built-In Coolant System with Wash-Down Hose

  • Built-In Coolant System with Wash-Down Hose

  • Powered Guide Arm

  • Powered Guide Arm

  • 5 HP Motor

  • Safety – Emergency Stop

  • Safety – Broken Blade Inidicator, Panic Stop Button and Safety Lockout Key

  • Standard Main Vise

  • Optional Cut Watcher System

  • Optional Laser Light

  • Optional Laser Light

  • Saw Mitering *Shown w/ Optional Left-Side Console

  • Saw Mitering *Shown w/ Optional Left-Side Console

  • Saw Mitering *Shown w/ Optional Left-Side Console

  • Saw Mitering *Shown w/ Optional Left-Side Console

  • Saw Mitering *Shown w/ Optional Left-Side Console

  • Optional Spray Mist Lubrication System

  • Optional 2nd Main Vise

  • Optional 2nd Main Vise

Shown with Optional 2nd Main Vise
Capacity increases slightly with Blade Cant Removed.

FootprintFlyerBrochure

D-015010-010 IND TUBE - Sheet1

SUPPORT

1 Year Parts Warranty
Spare Parts Kit & In-Depth Manual
Free Telephone Technical Support

Vertical: VT100HLM-60-CTS

Capacity: 18″ W x 20.75″ H
Miter: 18″ W x 14.25″ left @ 45°
Miter: 18″ W x 14″ right @ 45°
Miter: 18″ W x 9.75″ left @ 60°
Miter: 18″ W x 6.75″ right @ 60°
Blade: 15’6″ x 1.25″ x .042″
Cant: 4° Removable
Hydraulic Motor: 2 HP
Motor: 5 HP
Operation: Semi Automatic

STANDARD FEATURES

Adjustable Clamping Force
Blade Brush
Boltable Side Wings for Coolant Drainage
Broken Blade Indicator
Carbide Blade Guides
Electronic Controlled Traverse (Controls Feed Rate & Cutting Force)
Flood Coolant System w/ Wash-Down Hose
Forward Cut Stop
Full Stroking Main Vise
Powered Blade Tension
Powered Guide Arm
Safety Guards
Variable Blade Speed w/ Readout on Touch Screen
Swing-Away Control Console w/ 7″ Touch Screen
Powered Programmable Tilt w/ Angle Readout

220V/440V/3PH Electrical Motor Requirement

OPTIONAL FEATURES

10′ Idle Roller Load Table
10′ Idle Roller Stock Table
10′ Roller Discharge Table
2nd Main Vise
5′ Idle Roller Stock Table
5′ Roller Discharge Table
5′ Roller Load Table
Cut Watcher® System
Laser Light System
Pedestal Mounted Control Console
Power Raised Lift Up Rollers
Reduced Capacity Top Clamp – Main Vise
Spray Mist Lubrication
Swing-Away Top Clamp – Main Vise
12″ H Wear Plates – Non Mitered
Material List w/ Larger 8″ Touch Screen